Pipette pump capacity5-800 μL
Pipetting specificationsUp for the 50 μL pipette tip (P/N 417008): At 5 μL: ±5.0% accuracy and 5.0% CVAt 10 μL: ±5.0% accuracy and 5.0% CVAt 25 μL: ±4.0% accuracy and 2.5% CVAt 50 μL: ±2.5% accuracy and 2.0% CV
For the 200 μL pipette tip (P/N 417009): At 20 μL: ±5.0% accuracy and 5.0% CVAt 100 μL: ±2.0% accuracy and 1.5% CVAt 200 μL: ±1.5% accuracy and 1.0% CV
Pressure unitPositive pressure unit: Processing: 0-5 Bar (0.1 Bar Increments)Plate dry: 5 Bar at 600 mL/min
Format96-well extraction plates:
96-array plates for 1 and 2 mL wells
96-position extraction racks for 1 mL (tabless) columns (A format)
96-position tip racks for 200 μL, and 300 μL,DFE column tips
Plate positions6 position upper deck used for sample, extraction plates, pipette tips and solvents.
4 positions on lower deck carousel for multiple elution and waste.
Disposable tipsDisposable sample tips (Position 2): 50 uL, 200 uL, 1000 uL and 1000 uL clear wide bore tips.
Disposable solvent tips (Position 1): 50 uL, 200 uL, 1000 uL clear tips.
Disposable aolvent tips (Position 6): 50 uL, and 200 uL clear tips only.
TemperatureOperating temperature: 18°C to 32°C.
Storage and transportation temperature: -25 °C to 60 °C
Humidity10 to 90% RH
Power supply100 to 240 V, 50/60 Hz
FusesT4A at the power inlet (2 required)
Maximum power consumed300VA
Pressurized air supply>5 L/min (0.18 cubic feet/min), 6 ± 0.2 bar (0.6 ± 0.02 MPa; 87 ± 3 psi)
Inert gas supplyAIR port requirements: >5 L/min (0.18 cubic feet/min), 6 ± 0.2 bar (0.6 ± 0.02 MPa; 87 ± 3 psi).
N2 port requirements: 1 L/min (0.04 cubic feet/min) during processing and 70 L/min (2.5 cubic feet/min) during plate dry, 6 ± 0.2 bar (0.6 ± 0.02 MPa, 87 ± 3 psi)
Vacuum supplyPartial pressure range: < 500 mbar (50 kPa; 7 psi)
Flow rate: ≥ 8.3 L/min (0.29 cubic feet/min)
Max sound level65 dB(A)
GLPGLP software ready
CertificationsCE, CSA certified
