VersionGeneral information
Measuring lightP700-dual-wavelength-emitter: Sample wavelength 830 nm, reference wavelength 870 nm. Fluorescence emitter: 620 nm
Signal detectionPIN photodiode with special pulse preamplifier for measuring P700 and fluorescence changes with maximal time resolution of 10 μs
Power supplyRechargeable sealed lead-acid battery 12 V/2 Ah; Battery Charger MINIPAM/L (100 to 240 V AC)
Dimensions31 cm x 16 cm x 33.5 cm (W x H x D), with carrying handle
Weight4.5 kg
DesignFlexible, steel-spiral, plastic-covered bundle with three-pin optical connector
Weight300 g
Power supplyRechargeable sealed lead-acid battery 12 V/2 Ah; Battery Charger MINI-PAM/L (100 to 240 V AC)
Measuring lightP700 dual-wavelength emitter. Sample wavelength 830 nm, reference wavelength 875 nm
Actinic lightFar-red LED lamp: 730 nm. Chip-on-board (COB) LED array: 635 nm for continuous actinic illumination, maximum 3000 μmol m
Dimensions10.5 cm x 5.5 cm x 7 cm (L x W x H)
Weight400 g (incl. cables, 1 m long)
Actinic lightBlue (460 nm) LED lamp for continuous actinic illumination, maximum PAR 1100 μmol m
Signal detectionPIN photodiode with special pulse preamplifier for measuring P700 and fluorescence changes with maximal time resolution of 30 μs. Fluorescence is detected at wavelengths longer than 700 nm
Dimensions15 cm x 5.5 cm x 7 cm (L x W x H)
Weight500 g (including cables, 1 m long)
DesignAluminum box with custom foam packing for DUAL-PAM-100 and accessories
Dimensions60 cm x 40 cm x 25 cm (L x W x H)
Weight5 kg
DesignAluminum box with custom foam packing
Signal detectionPIN photodiode with special pulse preamplifier. Fluorescence is detected at wavelengths longer than 650 nm
Dimensions9.7 cm x 7.1 cm x 7.8 cm (L x W x H)
Weight350 g
Signal detection8 mm diameter side-on photomultiplier tube with a high voltage power supply assembled in a compact aluminum housing (Hamamatsu H6779). Two filters are provided for fluorescence detection at wavelengths > 650 nm or > 700 nm
Dimensions100 mm x 66 mm x 108 mm (L x W x H)
Weight490 g (incl. cable, 1.5 m long)
DesignAluminum chassis with texture paint. Line input 115/230 V AC, 50-60 Hz, 0.04/0.02 A. Two rotary buttons permit selection of 6 coarse amplification factors which 11 subdivisions
Dimensions11 cm x 11 cm x 7 cm (L x W x H)
Weight700 g
DesignTwo-way adapter consisting of male and female 15 pin sockets with aluminum housing
Dimensions11 cm x 4 cm x 1.5 cm (L x W x H)
Weight110 g
DesignCosine-response mini quantum sensor for selective measurement of photosynthetically active radiation (PAR, 400 – 700 nm) with Perspex diffuser disk as light entrance and signal amplifier box
Signal detectionHigh stability silicone photovoltaic detector with filter set providing equal response to photon fluxes across the PAR spectral range. The typical signal output of the detector is 2 μA / (1000 μmol m
Cable length3 m
Weight32 g
DesignMetal clip with fiber holder and 11 mm diameter sample hole: 5.5 cm x 1.4 cm (L x W)
Fiber holder1.2 cm length, mounted 0.7 cm above base, with lateral screw to fix fiber optics. Angle between fiber optics axis and sample plane: 60°. Two spacer rings to vary the distance between fiber end and leaf surface
DimensionsBase plate, 40 cm x 30 cm
