VersionGeneral information
DesignAluminum housing featuring an integrated PC module, large graphical color-display well readable in sunlight with touch screen, 4-channel CO
Design4-channel CO
Resolution0.01 ppm CO
Power supplyTwo field replaceable rechargeable Li-ion Batteries 14.4 V/6.8 Ah (000160101434, four batteries supplied), or AC Power Supply 3200‑N for laboratory operation. The Control Unit 3200-C may also be operated with a 12 or 24 V battery (only with optional battery cable 3200-C/BC provided by us).
Operating temperature-5 to 45 °C
Dimensions43 cm x 29.5 cm x 26 cm (L x W x H)
Weight12.3 kg (incl. two Li-ion eSMART batteries)
DesignDC power supply unit for laboratory use
Operating temperature0 to 60°C (depends on version, see label)
Dimensions20 cm x 8 cm x 5.5 cm (L x W x H) with connector inserting into the battery slot 15.3 cm x 7.9 cm x 2.3 cm (L x W x H), cable length 90 cm.
Weight1.07 kg
DesignUniversal measuring head featuring small-sized cuvette volume (40 ml), wide range temperature control and effective ventilation. Electronics box detachable for custom-built cuvettes, upper and lower cuvette halves pneumatically separated with one impeller each for upper and lower part, interchangeab
Dimensions31 cm x 7 cm x 13 cm (L x W x H)
Weight1.6 kg (incl. cable and tubes 2 m long)
DesignLED array with 67 warm white LEDs
Dimensions7.5 cm x 4.5 cm x 5.5 cm (L x W x H)
Weight196 g
DesignCombined PAM chlorophyll fluorometer and LED light source comprising an LED array with red LEDs (for actinic illumination and saturation pulses), blue LEDs (for additional actinic illumination), far-red LEDs, additional red LEDs (for measuring light) and 6 photodiodes (for chlorophyll fluorescence d
Measuring lightRed LEDs (635 nm), modulation frequency 5 to 100 Hz
Actinic lightBlue LEDs (470 nm) and red LEDs (635 nm), range blue: 0 to 400 µmol m
Far-red lightFar-red LEDs (peak: 740 nm)
Signal detectionPIN-photodiode protected by long-pass filter (> 700 nm), selective window amplifier
Operating temperature-5 to +50 °C
Dimensions7.5 cm x 6 cm x 8 cm (L x W x H)
Weight225 g
DesignAttachment to the Standard Measuring Head 3010-S for gas exchange measurements on above-ground plant matter of small pot plants. Consisting of an aluminum attachment, two pot holders and a support for the horizontal bedding of the Standard Measuring Head 3010-S
DesignAdapter Plate with legs and eye protection for positioning IMAG-MAXI Head on 3010-GWK1
Dimensions18.5 cm x 20 cm 17 cm (L x W x H)
Weight856 g
DesignChamber consisting of an aluminum cooling block with two pneumatic connectors and transversal fan, flat polymer lid or user-designed cuvette; micro-processor controlled electronics with connectors for temperature sensors, humidity sensor, PAR-sensors, GFS-3000 or 3010-I/Box connection, power-input;
Power supplyAC Power Supply 3020-N for laboratory operation
Weight6.9 kg including cables and tubes
DesignLED-Panel fitting to the gas exchange chamber 3010-GWK1: Illuminated area 14 cm x 12 cm.
Weight2.8 kg
Design2 Aluminum boxes with individual foam lining for GFS-3000 and accessories
Dimensions60 cm x 40 cm x 35 cm (L x W x H)
Weight5 kg (each)
DesignThe optical oxygen sensor 3085-O2 for gas measurements contains a sensor, which is based on luminescence quenching of a sensor dye. Molecular oxygen reversibly quenches the luminescence. This principle is very robust, has a very low drift and has virtually no interferences to other gases. Optics and
Operating temperature-10°C to 60°C
